Sedum Rubrotinctum Guide: How to Grow & Care for Jelly Bean Plant

Sedum Rubrotinctum – Jelly Bean 

Sedum rubrotinctum (Jelly Bean) is a perennial succulent species that grows naturally in Mexico, remains evergreen and does not grow much. This unique succulent species, which has a very interesting appearance, belongs to the Sedum (damkoruğu) genus in the Crassulaceae (damkoruğugiller) family. Sedum rubrotinctum plants look amazing both in succulent arrangements and on their own. Due to their spreading growth, mature Sedum rubrotinctum plants are also grown as ground covers.

Sedum rubrotinctum (jelly plant) is a type of flower that is very easy to care for and reproduce. It is reproduced from leaves and branches. The flower, which is very easy to plant in moist soil, is a beautiful plant that grows easily in every home. It is also among the long-lasting flowers. It is among the flowers preferred in homes and workplaces. Like most succulents, Sedum rubrotinctum plants require very little maintenance and do not require much attention to flourish. It is a type of plant that is easy to care for.

Jelly Bean – Sedum Rubrotinctum Features

Sedum rubrotinctum is one of the sedum species that is home to more than 500 different species. However, due to its Mexican origin it is not winter hardy and needs proper winter care during the cold season. It grows transversely and does well when planted in a hanging pot.

Growing to a height of only 20 cm, sedum rubrotinctum forms slender shoots with thick leaf clusters at the branch tips. The leaves are light green if kept in a cool and moist place. However, the leaves will turn red if grown in warmer weather and low humidity environments. Red or yellow flowers form at the end of winter.

How to Propagate Sedum Rubrotinctum?

Sedum rubrotinctum plants can be easily propagated by cutting their stems or plucking their leaves. The fallen leaves will also take root and soon turn into a new plant. You can also start the reproduction process by gently turning and tearing off a leaf on the stem of your plant. It is important that you do not break the leaf or stem; for roots will only grow from the base of the leaf when it is completely intact.

After gently plucking the leaves, spread them on top of well-drained soil and place in bright, indirect light.

You can propagate sedum rubrotinctum succulents in new pots or place the leaves at the base of the mother plant to protect them from scorching sunlight. You should not water the leaves until the roots have developed. Then you can water little by little, as in the care of a mature plant.

Over time, older specimens of the sedum rubrotinctum plant often become sparse. Therefore, the plant must be propagated in a timely manner to ensure the supply of young and healthy new specimens. The plant is so easy to propagate that even leaves that fall into the ground take root in a short time. Plant the leaves or shoot cuttings in a suitable soil. Keep the soil evenly moist but not wet. Choose a bright place out of direct sunlight for rooting. Temperatures above 20°C are ideal.

Sedum rubrotinctumcare

Sedum rubrotinctum comes from Central America. Therefore, it needs heat all year round. The plant cannot survive in sub-zero temperatures in winter. Although it can go outside in the summer, it should return indoors by mid-autumn at the latest. In winter, watering should be reduced and only enough water should be given so that the leaves do not wrinkle. In winter, temperatures between 5-10°C are ideal. It should spend the winter in a cool but bright place.

Sedum rubrotinctum is a succulent species that attracts attention with its color-changing interesting leaves. Its leaves resemble small beans. Its trunk has a woody style and displays beautiful yellow flowers in spring. It is easy to care for, but it cannot tolerate cold weather at all. Unlike many other succulent species, Sedum rubrotinctum is a very easy plant to maintain and does not make great demands on field conditions. If adequate sunlight is guaranteed, it will flourish magnificently and produce beautiful flowers. In some varieties, the tips of the leaves turn a bright red color at high temperatures. In the summer, it should be watered abundantly, without causing waterlogging. It is easy to propagate and should be propagated regularly as it gets a little ugly over the years. Due to its tropical origin, it is not cold-hardy and needs suitable winter areas during the cold season. 

Sedum rubrotinctum is ideal for those who are new to plant growing; for these plants flourish even when neglected. Drought-tolerant Sedum rubrotinctum plants do not need to be pruned or repotted as often. They are also extremely easy to propagate. Sedum rubrotinctum plants sprout when they receive plenty of sunlight and do not like excessive moisture. As long as you plant these gorgeous succulents in a sunny, warm spot and water them once in a while, they’re not happy!

The basic needs of our Sedum Rubrotinctum plant are as follows:

IRRIGATION:Sedum rubrotinctum should be watered regularly and intensively during the growth period. During this period, water is given until the soil is no longer able to absorb water. Immediately afterward, excess water should be drained from the pot immediately. The substrate should dry before the next watering, but do not allow the root ball to dry completely.

You should wait until the succulent leaves appear shriveled to make sure your plant is thirsty before watering. If you are growing your Sedum rubrotinctum plant in the garden, you do not need to water it extra as the precipitation will meet the water needs of your plant.

Sedum rubrotinctum succulent requires very little water to sprout. Sedum rubrotinctum plants are accustomed to limited humidity and prolonged drought. When grown indoors, the soil should be allowed to dry completely between two irrigations.

Tip: The pot should not stand in a saucer, as excess irrigation water can accumulate and often lead to rot.

LIGHT:The sedum rubrotinctum (jelly plant) plant needs lots of bright, indirect light to thrive. In places where it can get full sun, the tips of the leaves of this plant take on a red or orange color due to heat stress. It may be an indication that the plant is not getting enough sunlight, whether it stays green all over, or becomes long, slender-legged and grows slowly. In this case, you need to move it to a brighter place. In extremely hot climates, a location that gets shade for a few hours will be like medicine to this plant.

Indoor growing Sedum rubrotinctum plants are unlikely to exhibit crimson hues unless placed directly under a grow light. Still, it’s helpful to place your plant in a location that gets a minimum of six hours of full sun, such as a west- or south-facing window.

SOIL:Sedum rubrotinctum (jelly plant) plants can adapt to a wide variety of well-drained soils. These plants do not tolerate excess moisture and are known to be susceptible to root rot. Soils prepared for succulents and cacti are ideal for these plants, as they are generally rich in inorganic matter (such as perlite or pumice stone) and scarce in organic matter (peat or coco fiber).

Pruning:Most Sedum rubrotinctum plants tolerate pruning without issue. However, young plants grow very bushy and therefore need pruning. Sedum rubrotinctum can be lightly pruned once a year in early spring. Shorten very long shoots by no more than 2/3 of their length. You can also cut the shoots that have become excessively woody with pruning shears. Always disinfect cutting tools before using them.

FERTILIZATION:Sedum rubrotinctum (jelly plant) plants do not need to be fertilized regularly; these plants can also grow without problems in soils that are not rich in nutrients. To contribute to the healthy growth of your plant throughout the growing season, it is of course possible to give it an all-purpose fertilizer specially prepared for succulents/cacti from early to mid-spring; but it is not required. Over-fertilizing these plants will cause their roots to burn or their leaves to discolor. Therefore, you should fertilize them little by little.

The nutrient requirement of the plant is not high, but fertilizer should be given periodically. It is sufficient to fertilize once every 1-2 months from April to September. A fertilizer suitable for green plants or cacti can be used as fertilizer. After changing the pot, it does not need to be fertilized for the first year.

HEAT & HUMIDITY: A hot and dry climate is ideal for Sedum rubrotinctum (jelly plant); In extremely humid areas, these plants have to fight hard to survive. Although they are sensitive to frost, they can do well outdoors as long as the air temperature does not drop below -6-7 degrees Celsius.

:If you are growing your Sedum rubrotinctum (jelly plant) plant in the garden, you should remember that this unique species is not frost tolerant and must be brought indoors in generations 8 and below to survive the winter.

From late summer to early fall, dig up your plant and repot it. Next, place the pot in a part of your home that receives direct sunlight for at least six hours a day. The front of a west or south facing window would be ideal. It is natural for your plant to shed its leaves or change color as it gets used to the house.

When to Plant Sedum Rubrotinctum in Pots and Change Pots?

Sedum rubrotinctum (jelly plant) plants grow slowly and do not mind overflowing from their pots. Therefore, their pots do not need to be changed frequently and they can generally grow in the same pot for up to two years without any problems. Like most succulent varieties, Sedum rubrotinctum succulents have a shallow root system. Therefore, it is very important to choose the right flower pot. You should stay away from pots that are too deep; because the soil can hold excessive moisture under the root system, which invites root rot.

Shallow pots with perfect drainage holes are ideal for this succulent species. These plants also love earthen pots; because clay material absorbs excess moisture from the soil.

The Sedum rubrotinctum (jelly plant) plant should be transplanted into a larger pot when the roots completely cover the pot and the first root tips are visible on the surface. The best time to change the pot is in the spring. Ideally, amend its soil at the same time to increase its nutrient content. Keep a distance of at least 4 cm between the plant and the rim of the container. If the plant is very old, flowering may not be possible after repotting. Therefore, it is more rational to propagate older plants by shoots.

Sedum Rubrotinctum Plant Diseases

Common Pests and Diseases The

sedum rubrotinctum (jelly plant) plant can be attacked by some common pests such as cotton lice and bark lice. If you notice that your plant is infested, make a compress with a cotton ball dipped in rubbing alcohol to repel any pests you can see. Then use an insecticidal soap to treat your plant. Continue the treatment until the infestation is completely cleared.

If your plant’s soil is too moist, it’s possible that it also suffers from fungal mosquitoes from time to time. For succulents, this can easily be resolved by leaving the soil dry for a long time so that the larvae are destroyed before they grow and develop in moist soil. When you continue to water from where you left off, you should use a 10:1 water-oxygenated water (hydrogen peroxide) mixture to destroy the remaining larvae.

 

Leave a Comment